This article only introduces the part of the hardware installed memory. Please refer to the specific memory model required for the installation: https://jingyan.baidu.com/article/f54ae2fc6984e91e93b84964.html
Step 1: Prepare a special screwdriver and a film removal knife, find the 13 screw holes at the bottom of the computer, and then remove the film.
Step 2: Use a tissue to store the screws to avoid losing them, there are 13 screws in total.
Step 3: Put the computer keyboard down and use the tool to assist yourself to start to buckle the keyboard base. With
a little patience, slowly buckle down, and the tool can be pryed upwards
.
Slowly pry open in sequence.
Step 4: Find the part of the memory module, as shown in the figure, the silver metal shell is the memory module slot, and it will automatically pop up by gently pulling it up with your finger.
Step 5: Look at the positive and negative directions of the memory module, insert the yellow metal frame upwards and inwards, see the picture for details, and insert it inwardly, carefully press down on the upper buckle and insert the memory module successfully.
Step 6: Align the external buckle and close the silver metal cover to complete the insertion of the memory module.
Step 7: Don't install the machine with screws, temporarily install the bottom shell to test whether the computer is turned on. If the computer is powered on normally and the computer properties show that the memory size matches the total size after installing the memory, then proceed to screw installation. (If it cannot be turned on normally, it is very likely that 1 memory stick is installed in the wrong direction and 2 memory sticks are of the wrong type.) If the machine cannot be turned on normally and cannot be solved by yourself, please remove the newly added memory stick in time and send it to a computer repair shop Help how to install memory bars. If successful, then congratulations, you can enjoy the new experience happily.