1. Foreword:
This firmware is suitable for Huawei EC6109U and EC6109M general-purpose flashing machines without disassembly. The main control chip is Hisilicon 3798mv200. ADB is enabled by default in the firmware. Don’t flash if you mind! Please pay attention to identify the chip, do not mistakenly flash it, it is only for oil test and exchange.
2. Firmware features:
1. This firmware is available for EC6109U and EC6109M tests, and other boxes with the same chip can be tested by themselves;
2. Support original remote control, voice Bluetooth voice remote control;
3. There is a flashing tutorial in the firmware compression package, please read it carefully.
4. After flashing, the three networks are universal, and the application can be installed freely;
5. After flashing, there is no need for any fee to activate, and the boot directly enters the desktop (built-in sofa desktop)
4. Flashing steps:
Method 1 (recommended)
1. Prepare a fat format U disk, copy recovery.img, emmc, update.zip in the firmware package to the root directory of the U disk
2. Open the STB tool, enter the IP address of the box, and enter remote maintenance Verification code (settings-more-remote maintenance connection is set to "allow"), open adb after the connection is successful. 3. After the STB connection is successful, open the
one-key replacement recovery tool, enter the box ip to replace the recovery, and complete the REC replacement according to the prompts
(such as flash If you want to quit, try a few more times, and get the administrator permission)
4. Insert the U disk into the box
5. The box is completely powered off, then power on again, and press the left and right arrow keys alternately (if unsuccessful, continue to adjust the frequency), the following must appear The graphic interface is considered successful, wait patiently for the flashing to complete
Card swiping package:
Baidu link: https://pan.baidu.com/s/1IrLtMcauIgV2mkrLjHwd7w Extraction code: 4qa3
Backup link: https://share.weiyun.com/KWNV9MYG Password: tkytwj
Disclaimer: This Android firmware is only for internal testing and technical exchange. Any legal disputes caused by illegal commercial use and commercial conflicts of interest have nothing to do with me, and I am not responsible for it. Please delete it within 24 hours after downloading. Thank you for your cooperation! Flashing is both fun and risky, please choose carefully, all consequences caused by flashing are at your own risk, and I will not be responsible for it!