Conclusion: Macbook Pro 13.3-inch 2017 keeps the temperature under control, and the performance soars.
When the heat dissipation was not good 5 years ago, it was easy to trigger CPU frequency reduction.
1. Requirements:
- Long-term full-load operation without frequency reduction.
- Keep the temperature under control.
- Keep thermal noise under control.
Second, tried the cooling scheme
Cooling solution | illustrate | lowest temperature | full load temperature |
---|---|---|---|
1. Ultimate plan (cost 460 yuan) | 120w semiconductor cooling + thermal pad | 29 degrees | 69 degrees |
2. Recommended plan, complete silence (cost 50 yuan) | 828 cooling fan + thermal pad | 43 degrees | 79 degrees |
3. Do not disassemble the machine, low cost (20 yuan) | 828 cooling fan | 51 degrees | 91 degrees |
4. No money (0 yuan) | Macs Fan Control Software | 51 degrees | 100 degrees |
Remark
- Thermal pad Laird HR600, size 1.5mm * 40mm * 80mm, one piece is enough. (Excellent effect)
- Don't use 2mm, it will jack up the thick shell! And the heat dissipation effect is 2 degrees higher than 1.5mm.
- 828 cooling fan, the bottom fan type radiator is the best, cheap and quiet.
- I have tried many cooling bases, and the 828 works best (the more fancy the cooling effect, the worse the cooling effect, especially those with multiple fans)
- If you consider disassembling the phone and adding a cooling pad, you can easily replace the battery and battery cable. There is also some effect on temperature. (Estimated about 5 degrees)
The above content is my actual test, I hope it can help you.