学习笔记2——OpenMV与arduino通讯

官网的教程是这样的：http://book.openmv.cc/MCU/serial2.html
连接方式：


如果使用OpenMV IDE运行下面的程序：

import sensor, image, time
import json
from pyb import UART
# For color tracking to work really well you should ideally be in a very, very,
# very, controlled enviroment where the lighting is constant...
yellow_threshold   = ( 46,  100,  -68,   72,   58,   92)
# You may need to tweak the above settings for tracking green things...
# Select an area in the Framebuffer to copy the color settings.

sensor.reset() # Initialize the camera sensor.
sensor.set_pixformat(sensor.RGB565) # use RGB565.
sensor.set_framesize(sensor.QQVGA) # use QQVGA for speed.
sensor.skip_frames(10) # Let new settings take affect.
sensor.set_auto_whitebal(False) # turn this off.
clock = time.clock() # Tracks FPS.

uart = UART(3, 115200)

while(True):
    clock.tick() # Track elapsed milliseconds between snapshots().
    img = sensor.snapshot() # Take a picture and return the image.

    blobs = img.find_blobs([yellow_threshold])
    if blobs:
        print('sum : %d'% len(blobs))
        data=[]
        for b in blobs:
            # Draw a rect around the blob.
            img.draw_rectangle(b.rect()) # rect
            img.draw_cross(b.cx(), b.cy()) # cx, cy
            data.append((b.cx(),b.cy()))

        #{(1,22),(-3,33),(22222,0),(9999,12),(0,0)}
        data_out = json.dumps(set(data))
        uart.write(data_out +'\n')
        print(data_out)
    else:
        print("not found!")

用Arduino运行以下程序：

#include <SoftwareSerial.h>

SoftwareSerial softSerial(10, 11); // RX, TX
typedef struct
{
  int data[50][2] = {{0,0}};
  int len = 0;
}List;
List list;

void setup() {
  // put your setup code here, to run once:
  softSerial.begin(115200);
  Serial.begin(115200);
}

void loop() {
  if(softSerial.available())
  {
    getList();
    for (int i=0; i<list.len; i++)
    {
      Serial.print(list.data[i][0]);
      Serial.print('\t');
      Serial.println(list.data[i][1]);
    }
    Serial.println("============");
    clearList();
  }

}


String detectString()
{
  while(softSerial.read() != '{');
  return(softSerial.readStringUntil('}'));
}
void clearList()
{
  memset(list.data, sizeof(list.data),0);
  list.len = 0;
}
void getList()
{
  String s = detectString();
  String numStr = "";
  for(int i = 0; i<s.length(); i++)
  {
    if(s[i]=='('){
      numStr = "";
    }
    else if(s[i] == ','){
      list.data[list.len][0] = numStr.toInt();
      numStr = "";
    }
    else if(s[i]==')'){
      list.data[list.len][1] = numStr.toInt();
      numStr = "";
      list.len++;
    }
    else{
      numStr += s[i];
    }
  }
}

效果：

试了一下发现操作性不行啊
那么如何实现通信呢，现在探索一下！