1. Download UltraISO
https://cn.ultraiso.net/xiazai.html
2. Download the corresponding centos mirror file
https://www.centos.org/download/
http://mirrors.aliyun.com/centos/7/isos/x86_64/
3. Open UltraISO, select the image file in the local directory, double-click to open the image as shown in the figure
4. Start ==> write hard disk image
5. Click to write
6. Modify the volume label name
When the system restarts Note: the volume label name is installed The system name is the same as the boot boot name.
7. Plug the R730 into the USB and start the system.
8. Press F2 on the keyboard to enter the BIOS and set the priority to boot the USB flash drive;
Enter the interface below, click System BIOS to
enter the interface below, click Boot Setting to
enter the interface below, click BIOS Boot Setting to
enter the interface below, click Hard-Disk Driver Squence, choose to boot from USB to
complete the settings and save and exit. If settings are wrong, click Reset the Default to the default settings and configure again;
restart the system. When you
arrive at this interface, pay attention, hit the Tab key, the U disk name is the same as the LABEL name, otherwise the startup image file will not be found and error;
9. Start normally and configure the centos related information
server Use the English version
Configure the system time Asia Shanghai
Choose software and graphical interface; the server can use the default
partition:
we choose to configure the partition ourselves; automatic partition does not meet our requirements for the server.
Set root password and add user account and password
