plan 1:
It was under the CentOS-7.0-1406-x86_64-DVD.iso, 163 downloads in the mirror, and then use the UltraISO produced 9.6 U disk boot disk, but the emergence of this error in the installation and also the search for a long time, tried it, the following method is correct and feasible. in the end I will explain why
first step:
After finished, will get rid of the label name U disk, just what changed, but it is best simply, because the question will be used
Step two:
Start the installation, the installation interface, display interface 7. Install CentOS this time, choose the first option, that is, Install CentOS 7, by e edit startup items, the CentOS 7 x86_64 ... that string into
Yourself into a string, then ctrl + x start
Scenario 2;
Normal steps up to here, we should choose "Install CentOS 7" Press Enter then enter the installation interface. However, the actual result is that we can not get the installation interface, but to be wrong, as shown below:
The problem is that wood has to find your U disk, this configuration is required to be completed in the previous step, but in the previous step we do not know the file name of the U disk, so simply look at the U disk device name in this step, then and then go back to complete the configuration.
After the input #: cd / dev, you will then see the following interface:
My hard disk is sda corresponding file name (I loom only one hard disk), so U disk sdb is the corresponding file name, you can see a sdb4. At this point we restart it, back to the first picture shown in the interface, and then press the Tab key to vmlinuz initrd = initrd.imginst.stage2 = hd: LABEL = CentOS \ x207 \ x20x86_64 rd.live.check quiet read : vmlinuz initrd = initrd.img inst.stage2 = hd: / dev / sdb4 quite
Then press the ENTER key to enter the installation interface, you can successfully start the installation.
转载出处：https://blog.csdn.net/bajiudongfeng/article/details/47732377