原文链接
xbox
安装方法：
Updated Xpad Linux Kernel Driver
Driver for the Xbox/ Xbox 360/ Xbox 360 Wireless/ Xbox One Controllers
This driver includes the latest changes in the upstream linux kernel and additionally carries the following staging changes:
enable debug outputs to ease resolving issues
some minor code refactoring improving readability
Installing
sudo git clone https://github.com/paroj/xpad.git /usr/src/xpad-0.4
sudo dkms install -m xpad -v 0.4
(if you don’t install dkms please:
sudo apt-get install dkms(if you don’t know what is dkms:please click here
Updating
cd /usr/src/xpad-0.4
sudo git fetch
sudo git checkout origin/master
sudo dkms remove -m xpad -v 0.4 --all
sudo dkms install -m xpad -v 0.4
Removing
sudo dkms remove -m xpad -v 0.4 --all
sudo rm -rf /usr/src/xpad-0.4
Usage
This driver creates three devices for each attached gamepad
/dev/input/jsN
example jstest /dev/input/js0
/sys/class/leds/xpadN/brightness
example echo COMMAND > /sys/class/leds/xpad0/brightness where COMMAND is one of
0: off
1: all blink, then previous setting
2: 1/top-left blink, then on
3: 2/top-right blink, then on
4: 3/bottom-left blink, then on
5: 4/bottom-right blink, then on
6: 1/top-left on
7: 2/top-right on
8: 3/bottom-left on
9: 4/bottom-right on
10: rotate
11: blink, based on previous setting
12: slow blink, based on previous setting
13: rotate with two lights
14: persistent slow all blink
15: blink once, then previous setting
the generic event device
example fftest /dev/input/by-id/usb-*360*event*
Debugging
As a regular unpriveledged user
Setup console to display kernel log.
dmesg --level=debug --follow
Open a new console and access the device with jstest.
jstest /dev/input/jsX
Interact with the device and observe that data packets recieved from device are printed to kernel log.
[ 3968.772128] xpad-dbg: 00000000: 20 00 b5 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 40 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.772135] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804137] xpad-dbg: 00000000: 20 00 b6 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 fc fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804145] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152120] xpad-dbg: 00000000: 20 00 b7 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 b8 fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152129] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Save dmesg buffer and attach to bug report, don't forget to describe button sequences in bug report.
dmesg --level=debug > dmesg.txt
Ctrl+C to close interactive console sessions when finished.
Sending Upstream
git format-patch --cover-letter upstream..master
git send-email --to xxx *.patch